Electricity is the most useful and convenient form of power in the home. At the flick of a switch it provides lighting, heating and hot water and will operate a full range of domestic appliances. Where it comes from and how it is fed around the home is a mystery to most of us. The fact is that it is always there when it is wanted.
The design of electrical circuits and the siting of outlets is, naturally enough, related to the normal use to which they are likely to be put. Unfortunately, electricity demands vary from household to household, which means that a system designed for one user is unlikely to be totally suitable for another. There is, however, no reason why you should have to suffer a situation that is inconvenient.
Planning Electricity For Homes
Before investing your money in flats in Cochin from reputed real estate builders in Ernakulam, careful planning is most important. There’s no point in making changes in the domestic wiring only to find a few years that further facilities are required.
Make a note of all the fittings, socket outlets and switches already installed. Where facilities seem inadequate, make a plan of that area and mark the location of existing electrical fittings and what changes need to be changed.
Sound professional guidance is important from the point of view of safety, and to minimize the disruption that inevitably results from changes to the existing system. Discuss what is required with the architect or builder and then consult a qualified electrician.
Electrical Wiring Checklist
Even if you are intending in buying an ongoing flat near infopark you need to make sure the electrical safety measures the builders are considering. Here are some points to consider in estimating the extent of work required and how much planning to do Before you make a commitment with builders in Ernakulam
● Could ducting be created to control wiring routes within the structure of the house, making future changes simpler.
● How many socket outlets are need in each room?
● Have your power circuits got the capacity for all electric appliances and fittings, lights and equipment you might use at one time?
● Have you designed your lighting in advance of finalizing electrical wiring to make certain light fittings are correctly placed and wired?
● Low voltage light fittings require a transformer – has this been taken into account?
● Have you fully exploited the potential of track fittings for lights and power tracks for electrical equipment?
● Have you positioned switches and controls – such as light dimmers – with careful consideration of safety and comfort, especially for children, disabled people and the elderly?
● Have you considered using safety socket outlets which close off when not in use?
● Trailing wires can be a serious hazard, as well as spoiling the look of a room, ensure they are either buried in the structure of the building or firmly secured.
● Computer wiring must be carefully planned so your system is not interpreted or affected by other services and wiring. Seek professional help.
● Are you considering computer control to your domestic systems – including heating, lights, security, water heating – and this will involve complex wiring arrangements?
● If you are considering a self-contained apartment within the house, have you taken into account that a separate electric wiring circuit will be needed?
● Should your existing wiring be extended or renewed? If so, plan now for changes which can be made a results, such as improved lighting design, safe electrical fittings,getting rid of all trailing wires, placing extra socket outlets where required.
● Have you also recognized that major redecoration could result from the upheaval of extending or renewing electrical wiring?
Advice to New Homeowners
Having decided what is needed and estimated the amount of work involved – professional help should be sought from a qualified electrician.
The best way to ensure the right advice is through the local electricity board or utility. Before moving into your new home make sure to check with the nearby electricity board for the better understanding of the connection in the flats near SreePoornathrayeesa Temple [ Tripunithura ].
Useful Guidelines To Planning The Electrical Wiring
Lighting should always be considered not only from the practical point of providing essential light to see and work by, but also to highlight the features of a room and contribute to its atmosphere. Certain areas make specific demands on lighting – both the kitchen and bathroom need special consideration.
● Utilizing lighting track enables light fittings to be connected to a direct supply of electricity anywhere along the track.
● When fitting socket outlets, install double rather than single ones.
● An Uplight with a convenient foot switch or low-energy bulbs for long life and economy.
● Power track can be used along the back of a work surface for electrical equipment.
● Connections can be made with special safety plugs and sockets.
● A compact switch block which takes special small plugs and can be used for tidy cable management.
● When using electrical equipment outside, it can be connected to an outside socket, which is fitted with a residual current device.
The very first decisions that have to be made are exactly what is needed in the way of new fittings and socket outlets, what will have to be made or redirected and, possibly, what is obsolete. Where extensive new facilities are required, extra wiring circuits may have to be installed to cater for the increase in power demand.
Ensuring proper Electrical Safety for your home, of course, is a major job that can involve a lot of disturbance. In such a situation, it is well worth considering what other jobs are needed around the home and coordinating these to create one major upheaval, rather than suffer one disruption after another.
The basic guidelines when it comes to making a decision on what work will be required to satisfy individual requirements:
● Any existing wiring system older than twenty-five years should be replaced
● Do the new fittings or appliances need their own circuits?
● Where will new fittings or appliances be sited in relation to the distribution box?
● Are there enough power outlets in each room?
● Is there likely to be a risk of overloading existing circuits through the use of new appliances and fittings?
● Are the changes envisaged only to the lighting or other factors?